Blue Circle
Phoenix
Portland-Fly Ash Cement
(CEM II/B-V 42,5N)
Applications
Select to read more
Blue Circle
Phoenix
A factory manufactured Portland-fly ash cement.
Suitable for:
- Large pours, to reduce the risk of early-age thermal cracking.
- Reducing attack on concrete in sulfate conditions.
- Improved surface finish of concrete.
Contact our Customer Service team
Tele: 0845 812 6300
Email: [email protected]
Regional Order Numbers:
Scotland & North East England – 0845 4700 300
North & Midlands – 0845 4700 400
South Wales & South West – 0845 4700 500
London & South East – 0845 4700 600
Technical Information
Phoenix is available in bulk tankers throughout the United Kingdom.
Properties:
Phoenix Portland-fly ash concrete – when compared with Tarmac bulk Portland cement concrete at the same cement content – has the following properties:
Slower strength development and potentially higher long-term strength.
The appropriate cement content for concrete of a given 28 day cube strength and slump should be determined from trial mixes.
The cement content may differ from that of an equivalent Portland cement (CEM I) concrete in certain circumstances. In particular, where a high strength concrete is required, the cement content may be slightly higher than for CEM I.
Slower setting times.
Reduced water demand.
Improved placing and finishing.
Darker in colour
Phoenix Portland-fly ash cement conforms to BS EN 197-1 CEM II/B-V 42,5N.
Conditions for use:
Concrete, mortars and grouts containing Portland Cements must be specified and used correctly for best performance.
The cement content must be correct and the water: cement ration as low as possible consistent with satisfactory placing, thorough compaction and effective curing.
The final finish quality of this material will depend upon the operative having the required skills and a familiarisation with the materials and its application methods.
The final finish quality of this material will depend upon the operative having the required skills and a familiarisation with the materials and its application methods.
Tarmac cannot be held responsible where workmanship has not been carried out in accordance with good practice.
Phoenix is manufactured from natural products, and slight shade variations may occur. Phoenix will also have shade variations from differing manufacturing centres.
Quality
Quality assured CE Marked product.
Reducing Alkali risk
Reduces risk of Alkali-Silica Reaction.
Lower CO2
Lower embodied CO2 than CEM | Portland cement
Time Saving
Reduced mixing times (compared to using separate ash and Portland cement)
Easy Ordering
Single point ordering (compared to using separate ash and Portland cement)
Pumpability
Improves pumpability
Resistance
An enhanced resistance to sulfate and chloride ingress
Strength
Strength gain after 28 days.