How to lay a small area of concrete with Blue Circle Cement
When laying a small area of concrete using Blue Circle Cement, we recommend the following steps. This advice is designed to offer a general guide to help you create a step.
2+ hours
Medium
Printer-friendly version
Safe working
Working safely on any project is the most important thing. Here are a few tips to keep you safe.
Ensure you have the 'hands-on' skills to take on the project
Always read the label on the product packaging before starting
Always follow the product safety guidance before starting
Ensure you have the correct protective clothing for the job
Always be visible in your workspace
Materials and tools required for this job:
Hardcore (if needed)
Water
Wheelbarrow or mixing tray
Shovel
Trowel
Spirit level
Watering can (with rose)
Wooden boards for formwork (if needed)
Plastic sheeting
Safety gear
Online guide: How to lay a small area of concrete
Remember to follow safety guidelines and wear appropriate protective gear, including gloves and safety glasses, when working with cement. Additionally, always check and follow the specific instructions provided by the Blue Circle cement manufacturer. Using our guidance is your own responsibility.
Step 1
Prepare the Site
Mark the boundaries of the concrete area and dig out to the required depth.
Step 2
Level and Compact
Ensure the base is level and
compacted. Compact a layer of hardcore for
extra stability if required on soft ground.
Step 3
Install Formwork
Use wooden boards or other
materials to create formwork to the shape and
dimensions required and check levels.
Step 4
Mix the Concrete
Install Blue Circle Extra Rapid Set Cement according to the instructions on the bag. You can also use ready-to-use Blue Circle Quickset Concrete.
Step 5
Leveling and Finishing
Use a trowel and straight
edge to ensure the surface is even.
Clean your tools promptly after finishing to prevent any material from hardening on them.
Step 6
Curing
Cover the concrete with plastic sheeting
to protect from rain or frost and allow to cure
for the recommended time before removing the
formwork and placing any load on it.
